 |
| Specific Gravity(g/cm3): | |
|---|---|
| Fiber Spacing (um) (Dosage0.9/kg/m3): | |
| Nominal Diameter(um): | |
| Tensile strength(Mpa): | |
| Anti acid and alkali: | |
| Quantity: | |
XRT-CF
xinrui-te
Specific Gravity(g/cm3) | Fiber Spacing (um) (Dosage0.9/kg/m3) | 500-700 | |
Average Length(mm) | Elastic modulus(GPa) | 8-10 | |
Nominal Diameter(um) | Hydrophilia | Good | |
Tensile strength(Mpa) | 600-1000 | Specific surface area(cm2/g) | 20000-30000 |
Acid and alkali resistance | strong | Bond strength | strong |
Specifications: Because the fiber is short, thin, and difficult to store and transport, it is usually made into flat squares.
Dosage in concrete: 0.5- 1 kg.
1. Q: What construction projects can use this Cellulose fiber?
A: This concrete fiber is widely applied in ready-mix concrete, road & bridge pavement, hydraulic anti-seepage projects, building
floors, tunnels, and municipal concrete components.
2. Q: Is the mixing dosage of concrete fiber the same for different concrete grades?
A: Dosage varies with concrete grade and application. Standard dosage for C25-C40 ordinary concrete is 0.9~1.2kg per cubic meter;
Dosage increases for hydraulic and high-grade special concrete.
3. Q: Will concrete slump change obviously after mixing cellulose fiber?
A: Slump changes slightly under standard mixing dosage; you can adjust slump easily with a small amount of superplasticizer if
needed.
4. Q: Can you customize the specification of concrete fiber per project requirements?
A: Customization on fiber length, modified formula, and package is available; we adjust parameters for hydraulic, floor, and
pavement projects as per the customer’s requirement of concrete fiber.
